Authors: L.V. Kremleva, A.E. Kiseleva
Abstract
The performance of transport and installation operations when loading equipment into the spaces of ships under construction must ensure minimum duration of production cycles and routes of movement of the equipment elements under the adopted constraints. The article describes a method for simulating the processes of loading and unloading large-sized equipment into the spaces of a ship based on the principle of "reverse assembly" using the software. The method allows, at the stage of technological preparation of the production process, to simulate a virtual layout of premises, the movement trajectory for the components of large-sized equipment during loading, the sequence of operations, while providing a predictive estimate of the overall process labor intensity. The paper notes the shortcomings of the methodology, despite which it can become a methodological basis for the implementation of the simulation model of technological processes for loading large-sized equipment to optimize the resource support of operations and reduce the overall production complexity.
Keywords: modeling, large-sized equipment, technological process, technological operation, virtual layout, ЕВОМ, MBOM.
References
1. Lychkina N.N. Imitatsionnoe modelirovanie ekonomicheskikh protsessov: ucheb. posobie [Simulation Modeling of Economic Processes: Textbook. Allowance]. Moscow, Infra Publ., 2012, 353 p.
2. Galochkin D. A., Burmistrov E. G. Primenenie metoda imitatsionnogo modelirovaniya pri podgotovke sborochno-svarochnogo proizvodstva sudostroitel'noy verfi: monografiya [Application of the simulation method for preparing the assembly and welding production of shipyards: monograph]. N. Novgorod, Publishing Master plus, 2013, 151 p.
3. Mas F., Ríos J., Menéndez J.L. Conceptual Design of an Aircraft Final Assembly Line: A Case Study Key. Engineering Materials. 2012. vol. 502. pp. 49-54.
4. Anselmetti B., Fricero B. Aid tool for the design of process and aircraft assembly lines. Aerospace Science and Tech, 2012, vol. 23, pp. 387-398
5. Salleha N., Kasolangb S., Mustakimc M.A., Kuzaiman N.A. The Study on Optimization of Streamlined Process Flow Based on Delmia Quest Simulation in an Automotive Production System. Procedia Computer Science. 2017, vol. 105, pp. 191-196. Available at: https://doi.org/10.1016/j.procs.2017.01.206 (accessed 23.02.2018).
6. Chai S., Luo S., Zhang L. Study On Simulation Of The Main Shaft Production Line. Advanced Materials Research. 2012, vol. 472- 475, pp. 2076-2079.
7. Saffar S., Jafar F. A, Jamaludin Z. Methodology on Investigating the Influences of Automated Material Handling System in Automotive Assembly Process. IOP Conf. Series: Materials Science and Engineering. 2016. 114(1). no. 012053. Available at: https://doi.org/doi:10.1088/1757-899X/114/1/012053 (accessed 23.02.2018).
8. Caprace J.-D., Bair F., Losseau N., Rigo P. Minimization of Production Cost by use of an Automatic Cost Assessment Method and Simulation. Journal of Harbin Engineering University. 2006. vol. 27(2). pp. 399-408.
9. Li P., Cui J., Gao F., Wang Ch., Mao Y., Liao G. Research on the Assembly Sequence of a Ship Block Based on the Disassembly Interference Matrix. Journal of Ship Production and Design. 2015, vol. 31(4), pp.230-240. Available at: https://doi.org/10.5957/JSPD.31.1.140009 (accessed 20.03.2018)
10. Galochkin D.A., Ognev H.B., Burmistrov E.G. Organizatsiya potokovykh protsessov i razrabotka sredstv mekhanizatsii osnovnykh proizvodstv verfi s ispol'zovaniem metodov imitatsionnogo modelirovaniya i zakonov proizvodstvennoy logistiki [The organization of streaming processes and the development of means of mechanization of the shipyard's main production facilities using the methods of simulation and the laws of logistics production]. Sudostroenie [Shipbuilding]. 2013, vol. 2, pp. 49-53.
11. Gómeza A., Masb F., Menéndezb J.L., Ríosa J. A Knowledge based Application for Industrializationю. Design Procedia Engineering. 2013. vol. 63. pp. 318-326. Available at: https://doi.org/10.1016/j.proeng.2013.08.178 (accessed 20.03.2018)
12. Galochkin D.A. Razrabotka general'nogo i tekhnologicheskogo grafikov postroyki sudna s uchetom zakonov logistiki [Development of general and technological schedules of shipbuilding taking into account the laws of logistics.]. Vestnik VGAVT. Vypusk 31 [The Bulletin Volga State University of Water Transport. Release 31.]. N. Novgorod, Volga State University of Water Transport Publ., 2012, 208 p.
13. Aleksandrov V. L. Tekhnologiya sudostroeniya: uchebnik dlya VUZov [Technology of shipbuilding: textbook for high schools]. St. Petersburg, Shipbuilding Publ., 2003, 342 p.
14. Li K. Osnovy SAPR (CAD/CAM/CAE) [Fundamentals of CAD (CAD / CAM / CAE)]. St. Petersburg, Peter Publ.. 2004. 560 p.
About authors:
L.V. Kremleva - DSc, professor, Northern (Arctic) Federal University named after M.V. Lomonosov, 17, Severnaya Dvina Emb., 163002, Arkhangelsk, Russia, e-mail: kremleva67@mail.ru
Kiseleva Anna - JSC "PO "Sevmash", 58, Arkhangelskoye shosse, 164500, Severodvinsk, Arkhangelskaya oblast, Russia, e-mail: aekiseleva@bk.ru
Issue: 50/51 (2018)
For citation: L.V. Kremleva, A.E. Kiseleva. Loading process modeling for large-scale equipment of ships under construction. Research Bulletin by Russian Maritime Register of Shipping. 2018, No. 50/51, pp. 97-102.
* * *
Fr: 8:30 – 16:15 (msk)